Make your own free website on
Front Amber Turn Light design and Assembly:


I decided to make my own turn light and used these guys as parts:

The MR-16 21Watts halogen bulbs fits directly onto the smaller diameter hole on the copper bushing: 
They are also available in 35 and 50W at the Home Depot.
The amber lens is a 4" truck amber turn light lens reduced down to 1 1/4 inch diameter.



The 32mm amber lens is a small diameter. More ideally, a copper bushing with larger opening in the front would have been better. After visiting three differnt plumbing store, I gave up on looking for a bigger one, but later I found one, but decided to go on with original size. With the 35Watts halogen bulb, there is nothing wrong with the output.

Back to my headlight page